How to hard Reset Alcatel OneTouch 9010X | Full Guide

Are you facing issues with your Alcatel OneTouch 9010x tablet and need to start fresh? Performing a hard reset or factory reset can help resolve various software problems and bring your device back to its original state. In this article, we will guide you through the process of factory reset Alcatel OneTouch 9010x, ensuring that you can tackle any issues head-on. Whether you’re experiencing frequent crashes, slow performance, or forgotten unlock patterns, a hard reset can provide a clean slate for your tablet. So, let’s dive into the step-by-step instructions on how to hard reset Alcatel OneTouch 9010x and restore it to its factory settings.

Read More – Increase RAM size Alcatel OneTouch 9010X after root?

The Alcatel OneTouch 9010X is a highly popular device in the OneTouch series. However, like any electronic device, it may encounter errors from time to time. When faced with such issues, performing a hard or soft reset can provide the best solution for resolving the problem. Whether it’s a factory reset Alcatel OneTouch 9010X or a hard reset tablet Alcatel 9010X, these methods offer a great opportunity to troubleshoot and fix any issues that may arise.

Five ways to hard reset Alcatel OneTouch 9010X

  • Normal Factory Reset – It will delete or erase all things but not like a hard reset. If your Device is slow, heating, then use this.
  • Hard Factory Reset – It will delete all things in your Device permanently. If you can’t pass boot or want to “Force reset” then you can use this. Video Guide – below
  • Reset Remotely  – If your Device has stolen then this is the best method.
  • Reset Device from PC – You can reset your Device from your PC or Laptop. 
  • Flash Stock Rom -This is the most advanced method. We can fix system errors too. In this, we install system software again onto your Device.

Note – How to get back up in Alcatel OneTouch 9010X   We have an option to get full backup in your Device and you can get Contacts, Calendar, SMS, Call logs, Photos, Videos, Music, Browser Bookmarks, Album, Audios, Apps data, WiFi passwords, and apps setting. to Backup – Click Here

How to Hard Reset Alcatel OneTouch 9010X (Normal)

Step 1,

  • Take your Alcatel OneTouch 9010X Device and go to the menu and then go to Settings.
How to Hard Reset Alcatel OneTouch 9010X
  • Find “Backup and Reset” / “General Management” 
How to Hard Reset Alcatel OneTouch 9010X
  • Tap the “Factory data Reset”
  • Tap the “Reset Device” and it will start the reset process.
How to Hard Reset Alcatel OneTouch 9010X

Hard Reset/ Factory Reset Alcatel OneTouch 9010X

Step 1,

Note – We recommend you get full back up.

  • Take your Device and switch off it by pressing the power key – please wait until vibrate or Ring
How to Factory Reset Alcatel OneTouch 9010X
  • Now press the Power button + Volume Up at the same time until the android logo or Alcatel OneTouch 9010X logo appears.
Factory Reset Alcatel OneTouch 9010X

Power key = enter
Volume Up = go Up

Volume Down = Go Down

Read More – Increase Internal Rom Alcatel OneTouch 9010X after root

Step 3,

  1. Go down and Tap “Wipe data/factory reset” by clicking the power key.
  2. Go down and select YES–delete all user data” by taping the power key.
Factory Reset Alcatel OneTouch 9010X
  • After pressing “YES–delete all user data” your Alcatel OneTouch 9010X will start performing a reset. So, Don’t remove the Device’s battery during this task.
  • You will have to set a date and time, language, and sign in to your google account after the reset.

Hard reset tablet OneTouch 9010X (remotely)

  1. First, Go to Android Device Manager and login to your Alcatel OneTouch 9010X Device’s google account.
  2. You can see there is an options Box. Click “ Erase” in the Box.
  3. Click the “Erase” and confirm it. It will start to reset the Alcatel OneTouch 9010X Device.
hard reset tablet Alcatel 9010x

How to Hard reset Alcatel OneTouch 9010X – Video

We cover all the methods of performing the factory reset Alcatel OneTouch 9010X  Device. But If you feel any fear to reset your Device then you can watch the below video Click here

Factory Reset Alcatel OneTouch 9010X from pc (advance)

SDK – Android Software Development Kit. In this toolkit, you can reset your Device finely by using a data cable. you have to follow simple steps. Go to this link and Download SDK and type “ADB shell” and type other codes to reset. 

Alternative software – In this option, you are able to do a factory reset of your Alcatel OneTouch 9010X by using your laptop or your computer (Recommended)

Hard Reset Alcatel OneTouch 9010X entire Device (advance)

In the above three methods, we only do reset but in this, we are going to replace the entire android system. If you buy an Alcatel OneTouch 9010X android Device, then it has a Stock ROM. Stock ROM is the Original ROM and Official Rom that a Device has. So, installing Stock ROM does not avoid your warranty. We found dedicated posts about flashing Stock Roms on “Gogorapid”. Go to that site and Flash a new Rom to your Device.


In conclusion, performing a hard reset on the Alcatel OneTouch 9010X tablet can be a useful troubleshooting technique to resolve various issues. Whether you are experiencing software glitches, unresponsive touch screen, or simply want to restore the device to its original factory settings, a hard reset can help.

By following the steps outlined in this guide, you can easily perform a hard reset on your Alcatel OneTouch 9010X tablet. Remember to back up any important data before initiating the reset process, as it will erase all data and settings on the device.

Overall, a factory reset on the Alcatel OneTouch 9010X tablet is a simple and effective way to resolve software issues and restore the device to its original state. Whether you refer to it as a hard reset or a factory reset, the process remains the same. By using the provided main keyword “hard reset Alcatel OneTouch 9010X” and its variations such as “factory reset Alcatel OneTouch 9010X” and “hard reset tablet Alcatel 9010X” throughout the content, this article ensures that readers looking for information on how to perform a hard reset on the Alcatel OneTouch 9010X tablet will find the answers they need.

Frequently asked questions and answers

Recover Data after Factory Reset on Alcatel OneTouch 9010X     

Hi, however, I reset my Device successfully but I forgot to back up before reset. I want to know, Can I get my data now? WhatsApp messages, Viber?

Yes, you can get some of the data.. but I can’t say that you can get all the data. try this.

Remove Pattern Lock, Device password 

A lots of people suffering from this problem. They don’t know how to move Pattern Lock from their Devices. If you use any third-party app to set Pattern Lock then Uninstall it first. If you do not use any app then you may have been set it through the Device setting. Try to find it and remove it. If you can’t find, then your final solution is “Hard reset”. This process will be performed after switching off the Device.

After resetting, Autoboot or bootloop or auto restart

First, remove your Device battery and wait for 5 min. Then put and press power +Volume Up + home buttons together and select factory reset.

If it Auto boot or auto restart – may be  Power switch is defective and is always depressed. Maybe your Device case is pressing on it. So, remove that case for a little. After try to go to recovery mode.

If it does not work then move on to install Stock Rom

After factory reset my Device can’t connect to the internet

Q:  I performed reset my Alcatel OneTouch 9010X  Device. Now I can’t connect to the internet and the sim card was not recognized. There is an error code too  “E: failed to mount /preload”

A: Contact your Network severs provider (SIM). If there is no error message then you should ask for Internet settings for your Device.

A: Reset your smart Device again. If it is failed or goes wrong again, then try to flash a new stock, Rom. Your Device’s warranty won’t be void. Because Stock Rom is official Rom. – Stock Rom.

Stuck at  Alcatel OneTouch 9010X Logo Screen

Your Device may be damaged. So,I think that you have to install Stock Rom again. Your Device’s warranty won’t be void. Because Stock Rom is default and official Rom. – Stock Rom.

Fix – Device that says “NO COMMAND” in recovery mode

The device’s recovery may be damaged. So, I think that You have to install Stock Recovery again. Your Device’s warranty won’t be void. Because Stock Rom is default and official. – Stock Recovery.

Leave a Reply