How to Hard Reset Gionee S10BL- Full Guide

Are you facing issues with your Gionee S10BL smartphone and looking for a solution? hard reset Gionee S10BL will help to resolve various software-related problems and restore your device to its original factory settings. In this comprehensive guide, we will walk you through the steps to perform a hard reset on your Gionee S10BL, ensuring a smooth and hassle-free experience.

Read More – Increase RAM size Gionee S10BL after root?

The Gionee S10BL is a highly popular device in its series. However, like any other smartphone, it may encounter errors or issues from time to time. When faced with such situations, performing a hard or soft reset can provide the best opportunity to resolve these problems effectively. In this guide, we will explore the process of Gionee factory reset, allowing you to tackle any issues that may arise with your device.

There are five ways to hard reset Gionee S10BL

• Normal Factory Reset – It will delete or erase all things but not like a hard reset. If your Device is slow, heating, then use this.
• Hard Factory Reset – It will delete all things in your Device permanently. If you can’t pass boot or want to “Force reset” then you can use this. Video Guide – below
• Reset Remotely  – If your Device has stolen then this is the best method.
• Reset Device from PC – You can reset your Device from your PC or Laptop. 
• Flash Stock Rom -This is the most advanced method. We can fix system errors too. In this, we install system software again onto your Device.

Note – How to get back up in Gionee S10BL   We have an option to get full backup in your Device and you can get Contacts, Calendar, SMS, Call logs, Photos, Videos, Music, Browser Bookmarks, Album, Audios, Apps data, WiFi passwords, and apps setting. to Backup – Click Here

Gionee factory reset (Normal)

Step 1,

• Take your Gionee S10BL Device and go to the Menu and then go to Settings.

• Find “Backup and Reset” / “General Management” 

• Tap the “Factory data Reset”
• Tap the “Reset Device” and it will start the reset process.

Hard Reset Gionee

Step 1,

Note – We recommend you get full back up.

• Take your Device and switch off it by pressing the power key – please wait until vibrate or Ring

• Now press the Power button + Volume Up at the same time until the android logo or Gionee S10BL logo appears.

Power key = enter
Volume Up = go Up
Volume Down = Go Down

Read More – Increase Internal Rom Gionee S10BL after root

Step 2,

1. Go down and Tap “Wipe data/factory reset” by clicking the power key.
2. Go down and select “YES–delete all user data” by taping the power key.

• After pressing “YES–delete all user data” your Gionee S10BL will start performing a reset. So, Don’t remove the Device’s battery during this task.
• You will have to set a date and time, language, and sign in to your google account after the reset.

Gionee hard reset (remotely)

1. First, Go to Android Device Manager and login to your Gionee S10BL Device’s google account.
2. You can see there is an options Box. Click “ Erase” in the Box.
3. Click the “Erase” and confirm it. It will start to reset the Gionee S10BL Device.

Hard reset Gionee  – Video

We cover all the methods on how to hard reset Gionee. But If you feel any fear to reset your Device then you can watch the below video Click here

Gionee factory reset from pc (advance)

SDK – Android Software Development Kit. In this toolkit, you can reset your Device finely by using a data cable. you have to follow simple steps. Go to this link and Download SDK and type “ADB shell” and type other codes to reset. 

Alternative software – In this option, you can perform Gionee factory reset by using your laptop or your computer (Recommended)

Hard Reset Gionee S10BL entire Device (advance)

In the above three methods, we only do Gionee hard reset, but in this, we are going to replace the entire android system. If you buy an Gionee S10BL android Device, then it has a Stock ROM. Stock ROM is the Original ROM and Official Rom that a Device has. So, installing Stock ROM does not avoid your warranty. We found dedicated posts about flashing Stock Roms on “Gogorapid”. Go to that site and Flash a new Rom to your Device.

Conclusion

In conclusion, hard reset Gionee S10BL can be a useful solution for various issues that you may encounter with your device. Whether you are experiencing software glitches, freezing, or even forgotten passwords, a hard reset can help restore your Gionee S10BL to its original factory settings, providing a fresh start for your device.

By following the step-by-step guide provided in this article, you can easily perform a hard reset on your Gionee S10BL and resolve any persistent issues. Remember to backup your data before proceeding with the reset to ensure that you don’t lose any important information. With the knowledge and understanding of how to hard reset Gionee S10BL, you can confidently troubleshoot and overcome any obstacles that come your way.

Frequently asked questions and answers

Recover Data after Factory Reset on  Gionee S10BL     

Hi, however, I reset my Device successfully but I forgot to get back up before reset. I want to know, Can I get my data now? WhatsApp messages, Viber?

Yes, you can get some of the data. but I can’t say that you can get all the data. try this.

Remove Pattern Lock, Device password 

A lots of people suffering from this problem. They don’t know how to move Pattern Lock from their Devices. If you use any third-party app to set Pattern Lock then Uninstall it first. If you do not use any app then you may have been set it through the Device setting. Try to find it and remove it. If you can’t find then your final solution is “Hard reset”. This process will be performed after switching off the Device.

After resetting, Autoboot or bootloop or auto restart

First, remove your Device battery and wait for 5 min. Then put and press power +Volume Up + home buttons together and select factory reset.

If it Auto boot or auto restart – may be  Power switch is defective and is always depressed. Maybe your Device case is pressing on it. So, remove that case for a little. After try to go recovery mode.

If it does not work then install Stock Rom

After factory reset my Device can’t connect to the internet

Q:  I performed reset my Gionee S10BL  Device. Now I can’t connect to the internet and the sim card was not recognized. There is an error code too  “E: failed to mount /preload”

A: Contact your Network severs provider (SIM). If there is no error msg then you should ask for Internet settings for your Device.

A: Reset your smart Device again. If it is failed or goes wrong again, then try to flash a new stock, Rom. Your Device’s warranty won’t be void. Because Stock Rom is official Rom. – Stock Rom.

Stuck at  Gionee S10BL Logo Screen

Your Device may be damaged. So,I think that you have to install Stock Rom again. Your Device’s warranty won’t be void. Because Stock Rom is default and official Rom. – Stock Rom.

Fix – Device that says “NO COMMAND” in recovery mode

The device’s recovery may be damaged. So, I think that You have to install Stock Recovery again. Your Device’s warranty won’t be void. Because Stock Rom is default and official. – Stock Recovery.