Hard Reset Hitech Air A4 | Factory Reset Hitech Air A4 | Full Guide

PublishedPosted on

This article will give a set of instructions about performing hard/soft/remote reset  Hitech Air A4. Read this article and choose one method and reset your Hitech Air A4. (all these methods were tested by us.)

Read More – Increase RAM size Hitech Air A4 after root?

Hitech Air A4 is one of the popular Device In series. But Sometimes this Device may give errors. Then we have to deal with them. In that situation, Hard and Soft Reset give us the best opportunity to settle the problem.

There are five ways to factory Hard reset Hitech Air A4

  • Normal Factory Reset – It will delete or erase all things but not like a hard reset. If your Device is slow, heating, then use this.
  • Hard Factory Reset – It will delete all things in your Device permanently. If you can’t pass boot or want to “Force reset” then you can use this. Video Guide – below
  • Reset Remotely  – If your Device has stolen then this is the best method.
  • Reset Device from PC – You can reset your Device from your PC or Laptop. 
  • Flash Stock Rom -This is the most advanced method. We can fix system errors too. In this, we install system software again onto your Device.

Note – How to get back up in Hitech Air A4   We have an option to get full backup in your Device and you can get Contacts, Calendar, SMS, Call logs, Photos, Videos, Music, Browser Bookmarks, Album, Audios, Apps data, WiFi passwords, and apps setting. to Backup – Click Here


How to Hard Reset Hitech Air A4{Normally}

Step 1,

  • Take your Hitech Air A4 Device and go to the menu and then go to setting.
How to Factory Reset Hitech Air A4
  • Find “Backup and Reset” / “General Management” 
How to Factory Reset Hitech Air A4
  • Tap the “Factory data Reset”
  • Tap the “Reset Device” and it will start the reset process.

factory Hard reset ZTE



 Factory Reset / Hard Reset Hitech Air A4       

Step 1,

Note – We recommend you get full back up.

  • Take your Device and switch off it by pressing the power key – please wait until vibrate or Ring
How to Factory Reset Hitech Air A4
  • Now press the Power button + Volume Up at the same time until the android logo or Hitech Air A4 logo appears.
How to Factory Reset Hitech Air A4

Power key = enter
Volume Up = go Up

Volume Down = Go Down

Read More – Increase Internal Rom Hitech Air A4 after root

Step 3,

  1. Go down and Tap “Wipe data/factory reset” by clicking the power key.
  2. Go down and select YES–delete all user data” by taping the power key.
How to Factory Reset Hitech Air A4
  • After pressing “YES–delete all user data” your Hitech Air A4 will start performing a reset. So, Don’t remove the Device’s battery during this task.
  • You will have to set a date and time, language, and sign in to your google account after the reset.


Reset Hitech Air A4 remotely

  1. First, Go to Android Device Manager and login to your Hitech Air A4 Device’s google account.
  2. You can see there is an options Box. Click “ Erase” in the Box.
  3. Click the “Erase” and confirm it. It will start to reset the Hitech Air A4 Device.

Reset Samsung Galaxy Remotly


Reset Hitech Air A4 – Video

We cover all the sides of doing reset to Hitech Air A4  Device. But If you feel any fear to reset your Device then you can watch the below video Click here


Reset  Hitech Air A4 from pc (advance)

SDK – Android Software Development Kit. In this toolkit, you can reset your Device finely by using a data cable. you have to follow simple steps. Go to this link and Download SDK and type “ADB shell” and type other codes to reset. 

Alternative software – In this option, you are able to do a factory reset of your Hitech Air A4 by using your laptop or your computer (Recommended)


Hard Reset Hitech Air A4 entire Device (advance)

In the above three methods, we only do reset but in this, we are going to replace the entire android system. If you buy an Hitech Air A4 android Device, then it has a Stock ROM. Stock ROM is the Original ROM and Official Rom that a Device has. So, installing Stock ROM does not avoid your warranty. We found dedicated posts about flashing Stock Roms on “Gogorapid”. Go to that site and Flash a new Rom to your Device.



 

Frequently asked questions and answers

Recover Data after Factory Reset on  Hitech Air A4     

Hi, however, I reset my Device successfully but I forgot to get back up before reset. I want to know, Can I get my data now? WhatsApp messages, Viber?

Yes, you can get some of the data.. but I can’t say that you can get all the data. try this.


Remove Pattern Lock, Device password 

A lot of people suffering from this problem. they don’t know how to move Pattern Lock from their Devices. If you use any third-party app to set Pattern Lock then Uninstall it first. If you do not use any app then you may have been set it through the Device setting. Try to find it and remove it.. If you can’t find then your final solution is “Hard reset”. This process will be performed after switching off the Device.


After resetting, Autoboot or bootloop or auto restart

First, remove your Device battery and wait for 5 min. Then put and press power +Volume Up + home together and select factory reset.

If it Auto boot or auto restart – may be  Power switch is defective and is always depressed. Maybe your Device case is pressing on it. So, remove that case for a little. After try to go recovery mode.

If is does not work then install Stock Rom


After factory reset my Device can’t connect to the internet

Q:  I performed reset my Hitech Air A4  Device. Now I can’t connect to the internet and the sim card was not recognized. There is an error code too  “E: failed to mount /preload”

A: Contact your Network severs provider (SIM). If there is no error msg then you should ask for Internet settings for your Device.

A: Reset your smart Device again. If it is failed or goes wrong again, then try to flash a new stock, Rom. Your Device’s warranty won’t be void. Because Stock Rom is official Rom. – Stock Rom.


Stuck at  Hitech Air A4 Logo Screen

Your Device may be damaged. So,I think that you have to install Stock Rom again. Your Device’s warranty won’t be void. Because Stock Rom is default and official Rom. – Stock Rom.


Fix – Device that says “NO COMMAND” in recovery mode

The device’s recovery may be damaged. So, I think that You have to install Stock Recovery again. Your Device’s warranty won’t be void. Because Stock Rom is default and official. – Stock Recovery.

Leave a Reply