How to Hard Reset Konka V966Konka 610

How to Hard Reset Konka V966Konka 610

This article will give a set of instructions about performing hard/soft/remote reset  Konka V966Konka 610. Read this article and choose one method and reset your Konka V966Konka 610 . (all these methods were tested by us.)

Read More – Increase RAM size Konka V966Konka 610 after root?

Konka V966Konka 610 is one of popular Device In Konka series. But Sometimes this Device may give errors. Then we have to deal with them. In that situation Hard and Soft Reset give us best opportunity settle the problem.

There are five ways to factory Hard reset Konka V966Konka 610

  • Normal Factory Reset – It will delete or erase all things but not like a hard reset. If your Device is slow, heating, then use this.
  • Hard Factory Reset – It will delete all things in your Device permanently. If you can’t pass boot or want to “Force reset” then you can use this. Video Guide – below
  • Reset Remotely  – If your Device has stolen then this is the best method.
  • Reset Device from PC – You can reset your Device from your PC or Laptop. 
  • Flash Stock Rom -This is the most advanced method. We can fix system errors too. In this, we install system software again onto your Device.

Note – How to get backup in Konka V966Konka 610     

We have a option to get full backup in your Device and you can get Contacts,Calendar, SMS, Call logs, Photos, Videos, Music, Browser Bookmarks,Album, Audios, Apps data,WiFi passwords,and apps setting. to Backup – Click Here

How to Hard Reset Konka V966Konka 610{Normally}

Step 1,

  • Take your Konka V966Konka 610 Device and go to menu and then go to setting.
How to Hard Reset Konka V966Konka 610
How to Hard Reset Konka V966Konka 610
  • Find “Backup and Reset” / “General Management” 
How to Hard Reset Konka V966Konka 610
How to Hard Reset Konka V966Konka 610
  • Tap the “Factory data Reset”
How to Hard Reset Konka V966Konka 610
How to Hard Reset Konka V966Konka 610
  • Tap the “Reset Device” and it will start reset process.

factory Hard reset ZTE

 Factory Reset / Hard Reset Konka V966Konka 610       

Step 1,

Note – We recommend you to get full back up.

  1. Take your Device and switch off it by pressing power key – please wait until vibrate or Ring
  2. Now press the Power button + Volume Up at the same time until android logo or Konka logo appears.

factory Hard reset ZTE

Power key = enter
Volume Up = go Up

Volume Down = Go Down

Read More – Increase Internal Rom Konka V966Konka 610 after root

Step 3,

  1. Go down and Tap “Wipe data/factory reset” by clicking power key.
  2. Go down and select YES–delete all user data” by taping power key.

factory Hard reset ZTE

  • After pressing “YES–delete all user data” your Konka V966Konka 610 will start performing reset. So, Don’t remove Device’s battery during this task.
  • You will have to set date and time, language and sign into your google account after the reset.

Reset Konka V966Konka 610 remotely

  1. First, Go to Android Device Manager  and login to your Konka Device’s google account.
  2. You can see there is a options Box. Click “ Erase” in the Box.
  3. Click the “Erase” and confirm it. It will start to reset the Konka V966Konka 610 Device.

Reset Samsung Galaxy Remotly

Reset Konka V966Konka 610 – Video

We cover all the sides of doing reset to Konka Device. But If you feel any fear to reset your Device then you can watch below video Click here

Reset  Konka V966Konka 610 from pc (advance)

SDK – Android Software Development Kit. In this toolkit, you can reset your Device finely by using data cable. you have to follow simple steps. Go to this link and Download SDK and type “adb shell” and type other codes to reset. 

Alternative softwares – In this option, you are able to do a factory reset your Konka V966Konka 610 by using your laptop or your computer (Recommended)

Hard Reset Konka V966Konka 610 entire Device (advance)

In above three methods, we only do reset but in this, we are going replace entire android system. If you buy a Konka android Device, then it has a Stock ROM. Stock ROM is Original ROM and Official Rom that a Device has. So, installing Stock ROM does not avoid your warranty. We found dedicated posts about flashing Stock Roms on “Gogorapid”. Go to that site and Flash a new Rom to your Device.


Frequently asked questions and answers

Recover Data after Factory Reset on  Konka V966Konka 610     

Hi,however i reset my Device successfully but i forgot get back up before reset.. I want to know, Can i get my data now? whatsapp messages,viber?

Yes, you can get some of the data.. but I can’t say that you can get all the data. try this.

Remove Pattern Lock, Device password 

Lot of people suffering this problem they don’t know how to delete Pattern Lock from their Devices. If you use any third party app to set Pattern Lock then Uninstall it first. If you does not use any app then you may have been set it through the Device setting. Try to find it and remove.. If you can’t find then your final solution is “Hard reset”. This process will be performed after switching off the Device.

After resetting, Autoboot or bootloop or auto restart

First, remove your Device battery and wait for 5 min. Then put and press power +Volume Up + home together and select factory reset.

If it Auto boot or auto restart – may be  Power switch is defective and is always depressed. May be your Device case is pressing on it. So, remove that case for little. After try to go recovery mode.

If is does not work then install Stock Rom

After factory reset my Device can’t connect to internet

Q :  I performed reset my Konka V966Konka 610  Device. Now i can’t connect to internet and the sim card was not recognized. There is a error code too  “E:failed to mount /preload”

A : Contact your Network severs provider (SIM). If there is no any error msg then you should ask Internet settings for your Device.

A : Reset your smart Device again. If it is failed or go wrong again, then try flash a new stock Rom. Your Device’s warranty won’t be void. Because Stock Rom is official Rom. – Stock Rom.

Stuck at  Konka V966Konka 610 Logo Screen

Your Device may be damaged. So ,I think that you have to install Stock Rom again. Your Device’s warranty won’t be void. Because Stock Rom is default and official Rom. – Stock Rom.

Fix – Device that says “NO COMMAND” in recovery mode

Device’s recovery may be damaged. So ,I think that You have to install Stock Recovery again. Your Device’s warranty won’t be void. Because Stock Rom  is default and official. – Stock Recovery.


  • I knoԝ tjis if off topic Ьut Ι’m looking into starting my own blog and was curious ԝhat all is needеⅾ to get set uρ?
    I’m assuming hɑving a blog ⅼike yours woulⅾ cost ɑ preyty penny?I’m nott verfy internet smart s᧐ І’m not 100% ceгtain. Any tips ⲟr advice would be greatⅼy appreciated.

  • hey therе and tһank yоu for yоur information – I’ve ceгtainly picked ᥙp anything neew from ight herе.
    I Ԁid hoᴡeѵer expettise somee technical issues սsing this
    web site, as I experienced to reload tһe webb site many
    times ρrevious to I could get iit to load correctly. Ι һad Ьeen wondering if your wweb host іѕ OK?
    Not thаt I am complaining, ƅut sluggisdh loading instances
    tіmes ѡill verʏ frequently affect уouг placement in google ɑnd ϲаn damage your hiցh-quality score if ads аnd marketing with Adwords.
    Anyway I ɑm adding thіs RSStoo my e-mail and could look оut fоr much more of yoսr
    respective іnteresting content. Ensure thɑt you
    update tһis agаin very soon.

  • Actually no mqtter іf sommeone doеsn’t understand aftеr that itѕ սⲣ too ߋther viiewers tһat they ԝill assist,
    so һere it occurs.

  • It’s wonderful thɑt yoᥙ аre getting ideas frߋm
    tһis piece οf writin ɑs weol as from our argument
    made hеrе.

  • І’ve been surfing оn-line greatter than thгee hoᥙrs nowadays,
    yet Ι never discovered ɑny interesting article ⅼike
    yօurs. Ӏt is pretty νalue sufficient for me. In my νiew, if aⅼl website owners аnd bloggers mаde excellent ϲontent as yߋu did, tһe net ѡill lіkely Ƅе a
    lot more hlpful tһɑn evver befߋre.

Leave a Reply

Your email address will not be published. Required fields are marked *