How to Hard Reset ZTE Blade S6

How to Hard Reset ZTE Blade S6

This article will give set of instructions about performing hard/soft/remote reset ZTE Blade S6 . Read this article and choose one method and reset your ZTE Blade S6. (all these methods were tested by us.)

Read More – Increase RAM size ZTE Blade S6 after root?

ZTE Blade S6  is one of popular Device In ZTE series. But Some times this Device may give errors. Then we have to deal with them. In that situation Hard and Soft Reset give us best opportunity settle the problem.

There are five ways to factory Hard reset ZTE Blade S6

  • Normal Factory Reset – It will delete or erase all things but not like a hard reset. If your Device is slow, heating, then use this.
  • Hard Factory Reset – It will delete all things in your Device permanently. If you can’t pass boot or want to “Force reset” then you can use this. Video Guide – below
  • Reset Remotely  – If your Device has stolen then this is the best
  • Reset Device from PC – You can reset your Device from your PC or Laptop. 
  • Flash Stock Rom -This is the most advance method. We can fix system errors too. In this, we install system software again onto your Device.

Note – How to get backup in ZTE Blade S6

We have a option to get full backup in your Device and you can get Contacts,Calendar, SMS, Call logs, Photos, Videos, Music, Browser Bookmarks,Album, Audios, Apps data,WiFi passwords,and apps setting. to Backup – Click Here

How to Hard Reset ZTE Blade S6 {Normally}

Step 1,

  • Take your ZTE Blade S6 Device and go to menu and then go to setting.

factory Hard reset ZTE

  • Find “Backup and Reset” / “General Management” 

factory Hard reset ZTE

  • Tap the “Factory data Reset”

factory Hard reset ZTE

  • Tap the “Reset Device” and it will start reset process.

factory Hard reset ZTE


 Factory Reset / Hard Reset ZTE Blade S6  

Step 1,

Note – We recommend you to get full back up.

  1. Take your Device and switch off it by pressing power key – please wait until vibrate or Ring
  2. Now press the Power button + Volume Up at the same time until android logo or ZTE logo appears.

After pressing that, you should have  recovery screen or Boot Mode. ZTE have different versions so choose right Method


factory Hard Reset by using recovery screen 

factory Hard reset ZTE

Power key = enter
Volume Up = go Up

Volume Down = Go Down

Read More – Increase Internal Rom ZTE Blade S6 after root

Step 3,

  1. Go down and Tap “Wipe data/factory reset” by clicking power key.
  2. Go down and select YES–delete all user data” by taping power key.

factory Hard reset ZTE

  • After pressing “YES–delete all user data” your ZTE Blade S6 will start performing reset. So, Don’t remove Device battery during this task.
  • You will have to set date and time, language and sign into your google account after the reset.


factory Hard Reset by using Boot Mode

  • Take your Device and switch off it by pressing power key 
  • press the Power button + Volume Up at the same time until android logo or ZTE logo appears.

factory Hard reset ZTE

  • select the Recovery option by using the Volume Up and press Volume Down button to select it
  • The Device will show the Recovery Menu.

Hard reset ZTE

  • Now using the Volume buttons select “wipe data/factory reset” and tap the Power button to select.

reset ZTE

  • in this step select “Wipe All Applications” using Volume keys and after that confirm it using the Power button. Repeat this step and second time select the “Wipe Cache Partition” and wipe it too.

factory Hard reset ZTE

  • Now “reboot system now” using Power rocker by holding it for few seconds.


Reset ZTE Blade S6 remotely

  1. First, Go to Android Device Manager  and login to your ZTE Device’s google account.
  2. You can see there is options Box. Click “ Erase” in the Box.
  3. Click the “Erase” and confirm it. It will start to reset the ZTE Blade S6 Device.

Reset Samsung Galaxy Remotly

Reset ZTE Blade S6 – Video

We cover all the sides of doing reset to ZTE Device. But If you feel any fear to reset your Device then you can watch below video;

method 1 – Video Steps

Method 2 – Video Steps

Reset ZTE Blade S6 from pc (advance)

SDK – Android Software Development Kit. In this toolkit, you can reset your Device finely by using data cable. you have to follow simple steps. Go to this link and Download SDK and type “adb shell” and type other codes to reset. 

Alternative softwares – In this option, you are able to do a factory reset your ZTE Blade S6 by using your laptop or your computer (Recommended)

Hard Reset ZTE Blade S6 entire Device (advance)

In above three methods, we only do reset but in this, we are going replace entire android system. If you buy a ZTE android Device, then it has a Stock ROM. Stock ROM is Original ROM and Official Rom that a Device has. So, installing Stock ROM does not avoid your warranty. We found dedicated posts about flashing Stock Roms on “Gogorapid”. Go to that site and Flash a new Rom to your Device.


Frequently asked questions and answers

Recover Data after Factory Reset on ZTE Blade S6

Hi,however i reset my Device successfully but i forgot get back up before reset.. I want to know, Can i get my data now? whatapp messages,viber?

Yes, you can get some of the data.. but I can’t say that you can get all the data. try this.

Remove Pattern Lock, Device password 

Lot of people suffering this problem they don’t know how to delete Pattern Lock from their Devices. If you use any third party app to set Pattern Lock then Uninstall it first. If you does not use any app then you may have been set it through the Device setting. Try to find it and remove.. If you can’t find then your final solution is “Hard reset”. This process will be performed after switching off the Device.

After resetting, Autoboot or bootloop or auto restart

First, remove your Device battery and wait for 5 min. Then put and press power +Volume Up + home together and select factory reset.

If it Auto boot or auto restart – may be  Power switch is defective and is always depressed. May be your Device case is pressing on it. So, remove that case for little. After try to go recovery mode.

If is does not work then install Stock Rom

After factory reset my Device can’t connect to internet

Q :  I performed reset my ZTE Blade S6 Device. Now i can’t connect to internet and the sim card was not recognized. There is a error code too  “E:failed to mount /preload”

A : Contact your Network severs provider (SIM). If there is no any error msg then you should ask Internet settings for your Device.

A : Reset your smart Device again. If it is failed or go wrong again, then try flash a new stock Rom. Your Device’s warranty won’t be void. Because Stock Rom is official Rom. – Stock Rom.

Stuck at ZTE Blade S6 Logo Screen

Your Device may be damaged. So ,I think that you have to install Stock Rom again. Your Device’s warranty won’t be void. Because Stock Rom is default and official Rom. – Stock Rom.

Fix – Device that says “NO COMMAND” in recovery mode

Device’s recovery may be damaged. So ,I think that You have to install Stock Recovery again. Your Device’s warranty won’t be void. Because Stock  is default and official. – Stock Recovery.