How to Hard Reset CCIT T2 Max

Are you facing issues with your CCIT T2 Max and need to reset it to its original factory settings? Performing a hard reset on your CCIT T2 Max can help resolve various software-related problems, such as freezing, lagging, or unresponsive applications. In this article, we will guide you through the process of performing a hard reset CCIT T2 Max. Whether you want to factory reset CCIT T2 Max we’ve got you covered. So, let’s dive in and learn how to bring your CCIT T2 Max back to its default state for a fresh start.

Read More – Increase RAM size CCIT T2 Max after root?

The CCIT T2 Max, being a popular device in the CCIT series, is not exempt from occasional errors. When faced with such issues, performing a hard reset or soft reset can provide the best opportunity to resolve the problem. Whether you encounter the need for a master reset, factory reset, or CCIT mobile hard reset, these options can effectively address any issues that may arise with the CCIT T2 Max.

Five ways to factory reset CCIT T2 Max

Normal Factory Reset – It will delete or erase all things but not like a hard reset. If your Device is slow, heating, then use this.
Hard Factory Reset – It will delete all things in your Device permanently. If you can’t pass boot or want to “Force reset” then you can use this. Video Guide – below
Reset Remotely – If your Device has stolen then this is the best method.
Reset Device from PC – You can reset your Device from your PC or Laptop.
Flash Stock Rom -This is the most advance method. We can fix system errors too. In this, we install system software again onto your Device.

Note – How to get backup in CCIT T2 Max

We have a option to get full backup in your Device and you can get Contacts,Calendar, SMS, Call logs, Photos, Videos, Music, Browser Bookmarks,Album, Audios, Apps data,WiFi passwords,and apps setting. to Backup – Click Here

How to hard reset CCIT T2 Max (Normal)

Step 1,

Take your CCIT T2 Max Device and go to Menu and then go to “Settings“.

Find “Backup and Reset” / “General Management”

Tap the “Factory data Reset”

Tap the “Reset Device” and it will start reset process.

Factory reset CCIT T2 Max

Step 1,

Note – We recommend you to get full back up.

Take your Device and switch off it by pressing power key – please wait until vibrate or Ring
Now press the Power button + Volume Up at the same time until android logo or CCIT logo appears.

Power key = enter
Volume Up = go Up
Volume Down = Go Down

Step 2,

Go down and Tap “Wipe data/factory reset” by clicking power key.
Go down and select “YES–delete all user data” by taping power key.

After pressing “YES–delete all user data” your CCIT T2 Max will start performing reset. So, Don’t remove Device’s battery during this task.

You will have to set date and time, language and sign into your google account after the reset.

Master reset CCIT T2 Max (remotely)

First, Go to Android Device Manager and login to your CCIT Device’s google account.
You can see there is a options Box. Click “ Erase” in the Box.
Click the “Erase” and confirm it. It will start to reset the CCIT T2 Max Device.

CCIT hard reset- Video

We cover all the sides of doing reset to CCIT Device. But If you feel any fear to reset your Device then you can watch below video Click here

Hard reset CCIT T2 Max from pc (advance)

SDK – Android Software Development Kit. In this toolkit, you can reset your Device finely by using data cable. you have to follow simple steps. Go to this link and Download SDK and type “adb shell” and type other codes to reset.

Alternative softwares – In this option, you are able to do a factory reset your CCIT T2 Max by using your laptop or your computer (Recommended)

Master reset CCIT T2 Max entire Device (advance)

In above three methods, we only do reset but in this, we are going replace entire android system. If you buy a CCIT android Device, then it has a Stock ROM. Stock ROM is Original ROM and Official Rom that a Device has. So, installing Stock ROM does not avoid your warranty. We found dedicated posts about flashing Stock Roms on “Gogorapid”. Go to that site and Flash a new Rom to your Device.

Conclusion: How to hard reset CCIT T2 Max

Performing hard reset CCIT T2 Max can be a useful troubleshooting step in case of software issues or to restore the device to its original factory settings. Whether you refer to it as a master reset CCIT T2Max or factory reset CCIT T2 Max, the process remains the same. By following the steps outlined in this article, you can easily reset your CCIT T2 Max and resolve any software-related problems you may be experiencing.

Remember to back up your important data before proceeding with the reset. If you encounter any difficulties during the process, consult the CCIT support documentation or reach out to their customer support for further assistance. Taking the time to perform a hard reset can often save you from unnecessary frustration and help restore your CCIT mobile to its optimal performance.

Frequently asked questions and answers

Recover Data after Factory Reset on CCIT T2 Max

Hi,however I reset my Device successfully but I forgot to back up before reset. I want to know, Can I get my data now? WhatsApp messages, Viber?

Yes, you can get some of the data. But I can’t say that you can get all the data. Try this.

Remove Pattern Lock, Device password

Lots of people suffering this problem they don’t know how to delete Pattern Lock from their Devices. If you use any third party app to set Pattern Lock then Uninstall it first. If you does not use any app then you may have been set it through the Device setting. Try to find it and remove. If you can’t find then your final solution is “Hard reset”. This process will be performed after switching off the Device.

After resetting, Autoboot or bootloop or auto restart

First, remove your Device battery and wait for 5 min. Then put and press power +Volume Up + home buttons together and select factory reset.

If it Auto boot or auto restart – may be Power switch is defective and is always depressed. May be your Device case is pressing on it. So, remove that case for little. After try to go recovery mode.

If it does not work then install Stock Rom

After factory reset my Device can’t connect to internet

Q : I performed reset my CCIT T2 Max Device. Now I can’t connect to internet and the sim card was not recognized. There is a error code too “E:failed to mount /preload”

A : Contact your Network severs provider (SIM). If there is no any error msg then you should ask Internet settings for your Device.

A : Reset your smart Device again. If it is failed or go wrong again, then try flash a new stock Rom. Your Device’s warranty won’t be void. Because Stock Rom is official Rom. – Stock Rom.

Stuck at CCIT T2 Max Logo Screen

Your Device may be damaged. So, I think that you have to install Stock Rom again. Your Device’s warranty won’t be void. Because Stock Rom is default and official Rom. – Stock Rom.

Fix – Device that says “NO COMMAND” in recovery mode

Device’s recovery may be damaged. So, I think that You have to install Stock Recovery again. Your Device’s warranty won’t be void. Because Stock Rom is default and official. – Stock Recovery.

Hansi

Internal-level-1